HomeEnvironmentConservation I purchased one of those Killawatt devices, and want to know how to convert KWH to dollars
Environment
I purchased one of those Killawatt devices, and want to know how to convert KWH to dollars
Saturday, 05 July 2008 00:00
Jacob V
Environment -
Conservation
The Killawatt device hooked to my computer says it uses 1.66 KWH. How much does this cost me? My power company says they charge 7.627 cents per KWH, and I run my computer 24/7.
Thanks.
Simple - Multiply kwh by cost to find how much you spend per hour.
1.66*7.627=12.66082 cents per hour.
report abuse
vote down
vote up
Paul
Votes: +0
There's no way your computer is using 1.66KW, unless you have a built-in microwave or a coffee pot. If your computer has a 800watt power supply (big), and your monitor was rated at 300watt (big CRT), you could only pull down 1.1Kw/H and that's with everything maxed out. Unless you have a laser printer plugged in, and then it only goes up while you're printing.
Maybe there is a reset button or a calibration setting that is wrong.
A typical computer uses 250watts, a typical monitor uses 250 watts, a ink jet printer on standby uses less than 2 watts, so at $07.627/Kw/H it would use less than 4 cents per hour to run. Even less for a LCD monitor or an efficient system.
A good rule-of-thumb is that if you payed $0.11/Kw/H (average) it costs about a dollar each year per watt to run something 24/7. A 100w bulb running 24/7 would use $100/year to run.
report abuse
vote down
vote up
GABY
Votes: +0
Jello is correct. That seems very high for a computer, though. Not sure I believe the device you purchased is accurate. I believe Laptop computer uses a fraction of that.
report abuse
vote down
vote up
groingo
Votes: +0
You're only paying 7.6 cents a KWH?...I only wish our rates were that low!
Try using your sleep mode when not in use and do yourself a favor, turn it off when not in use for a period of time like when your asleep.